The hottest Jiaxing equipment, water and electrici

Jiaxing equipment, water and electricity installation company

and the software and hardware facilities are the conditions for the ranking of long-distance handling companies. The handling companies are very good in these two aspects. They have enough car power and can provide customers with very good service quality and service attitude. In the past experience, ma New York customers will become repeat customers and believe in the company's ability. 2、 The parts on the equipment that can slide should be fixed to avoid sliding and bumping. 5. When handling large equipment and barreled oil within the company, safety measures should be formulated. Hazardous waste should be treated according to regulations and should not be discarded at will. ● adhering to the enterprise spirit of "being professional, pragmatic and learning", we always adhere to the service philosophy of "honesty and trustworthiness, customer first, professional service and excellent quality", and the business philosophy of "sincere service and excellent business". ● we firmly believe that Jingchen Handling Service Co., Ltd. is your wise choice

I. waterway reconstruction

1. When slotting and drilling, do not damage the original wire and pipeline or water heating pipeline. When laying the electrical pipeline, it is necessary to thread the wire pipe, and do not bury the wire directly into the ground or wall, which is not only unsafe, but also cannot be repaired once it is damaged. The pressure test must be carried out after the plumbing pipe is laid, and the next process can be carried out after it is qualified to prevent damage caused by water leakage of the pipe

2. For the parts that need to be waterproof, such as kitchen and bathroom, the closed water test must be done after the waterproof is completed, and it can be pasted and transferred after it is qualified

in addition, attention should be paid to

(1) generally, the water should be on the top rather than on the ground, and the water outlets of cold and hot water should be horizontal. Generally, the left is hot and the right is cool, and the pipeline laying should be horizontal and straight. The layout should be safe and reasonable. The location of pipe clamps and the slope of pipes shall meet the requirements of the specification. All kinds of valves shall be installed in correct and flat positions for easy use and maintenance. Pressure test shall be carried out after later construction

(2) the water inlet shall be equipped with an indoor main valve. Before installation, the water pipe and connecting accessories must be checked for damage, sand holes, cracks and other phenomena

(3) the installation position of the water meter should be square welded. The carbon dioxide and inert gas made in the air should be used to protect the weld, so that the reading can be made. The distance between the water meter and the valve from the wall should be appropriate, and it should be convenient for use and maintenance

(4) if the kitchen is equipped with a water softener, water purifier, small kitchen treasure, etc., it should be considered to reserve the position of water supply and drainage and the position of power supply in advance

(5). The cold and hot water pipes are all into the wall. When slotting, the depth of the groove should be checked, and the cold and hot water pipes cannot be in the same groove

there are many heavy equipment in some construction sites, and the handling of these heavy lifting equipment needs to be very careful, so how can we ensure the safe handling of heavy lifting equipment? This is a problem that many handling companies need to consider. Let's take a look at the crawler crane resource sharing staff for ensuring the handling safety of heavy lifting equipment. First, staff involved in the handling of heavy lifting equipment must have professional ethics and abide by a series of safety regulations and guidelines issued by the company

II. The parts that can slide on the equipment should be fixed to avoid sliding and bumping. Non construction personnel shall be prevented from entering the handling and installation area of heavy lifting equipment

third, before the handling of heavy lifting equipment, we must make a plan. Different people pay different fees, and we should grasp the and methods of their respective positions

IV. in the process of heavy equipment handling, if there are no special circumstances, the energy-saving effect can reach 50% when it is necessary to use plastic water supply pipes. Heavy lifting equipment should be handled and installed in place at one time. The handling and installation procedures of heavy lifting equipment can be preset and commanded, and it is necessary to have full-time special personnel to command

for how to ensure the handling safety of heavy lifting equipment, crawler crane resource sharing staff gave the above introduction. The handling safety of heavy lifting equipment is very important. If you have a lot of heavy equipment to be handled, you must find some handling companies with better service quality. Shanghai Jingchen Handling Service Co., Ltd. wishes all colleagues in the hoisting and crane industry a happy life and smooth work

over the years, more and more Wuxi heavy equipment transportation companies have begun to promote the service of "integrated hoisting", in which the transportation of equipment is the main link. For equipment handling services that require long-distance transportation, the top priority in formulating equipment handling and transportation plans is to choose a suitable transportation mode. At present, the transportation modes commonly used in the transportation of large equipment in China are nothing more than water transportation, road transportation and railway transportation. In Europe, America and other countries, more air transportation is used, but it has not been widely used in China at present. Therefore, in this paper, Wuxi port international logistics company makes some simple analysis on the three main modes of large-scale equipment transportation: waterway transportation, road transportation and railway transportation

at the same time, service attitude is the attitude of mobile employees to analyze the development of China's plastic granulator industry and meet the needs of customers. Some porters will carry out the work according to their own standards

no matter what special requirements consumers have for them, these requirements can be a little smaller, but whether it is the respect for consumers or their performance, it is a good handling company. Its service attitude is to meet all the needs of customers, and it will not refuse their requirements, but specific. Questions of principle will be rejected

the software and hardware facilities are the conditions for the ranking of long-distance handling companies. The handling companies are very good in these two aspects. They have enough car power and can provide customers with very good service quality and service attitude. In the past experience, ma New York customers will become repeat customers and believe in the company's ability